VTech Baby Toy 91 009642 000 User Manual

User’s Manual  
TM  
BLISTER THE VELOCIRAPTOR  
© 2013 VTech  
Printed in China  
US  
91-009642-000  
 
INTRODUCTION  
My name is Blister the VelociraptorTM, and I’m looking for a few  
good dinos to join my squad. But let me warn you – you’ve got to be  
at your best to keep up with me! I’m fast and ferocious with sharp,  
curved claws that make me as tough as any dino.  
I make a pretty tough helicopter too! I patrol the skies with my  
searchlight shining down from above. Once I’ve got a target in my  
sights, there’s nowhere for it to hide!  
Volume Button  
Launch Button  
Searchlight Button  
Talk Button  
Style Button  
LCD Screen  
Sound Button  
Propeller Button  
ON/OFF Switch  
2
 
INCLUDED IN THIS PACKAGE  
One VTech® SWITCH & GO DINOS®: Blister the VelociraptorTM  
One user’s manual  
WARNING:  
All packing materials, such as tape, plastic sheets, packaging  
locks and tags are not part of this toy, and should be discarded  
for your child’s safety.  
ATTENTION:  
Pour la sécurité de votre enfant, débarrassez-vous de tous  
les produits d’emballage tels que rubans adhésifs, feuilles de  
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.  
NOTE:  
Please keep the user’s manual as it contains important information.  
GETTING STARTED  
BATTERY INSTALLATION  
1. Make sure the unit is turned OFF.  
2. Locate the battery cover on the bottom  
of the unit. Use a screwdriver to loosen  
the screw.  
3. Install 2 new “AA” (LR6/AM-3) batteries  
into the main unit following the diagram  
inside the battery box. (The use of new,  
alkaline batteries is recommended for  
maximum performance.)  
4. Replace the battery cover and tighten  
the screw to secure.  
3
 
BATTERY NOTICE  
Use new alkaline batteries for maximum performance.  
Use only batteries of the same or equivalent type as recommended.  
Do not mix different types of batteries: alkaline, standard (carbon-  
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.  
Do not use damaged batteries.  
Insert batteries with the correct polarity.  
Do not short-circuit the battery terminals.  
Remove exhausted batteries from the toy.  
Remove batteries during long periods of non-use.  
Do not dispose of batteries in fire.  
Do not charge non-rechargeable batteries.  
Remove rechargeable batteries from the toy before charging (if  
removable).  
Rechargeable batteries are only to be charged under adult  
supervision.  
4
 
PRODUCT FEATURES  
1. TURNING THE UNIT ON  
Slide the ON/OFF Switch to ON to turn the unit ON.  
2. STYLE BUTTON  
Press the Style Button to choose a pilot  
or change the dino eyes.  
3. VOLUME BUTTON  
Press the Volume Button to adjust the  
volume.  
There are four levels available: low,  
medium, high, and mute.  
4. TALK BUTTON  
Press the Talk Button to hear the dino  
or pilot talk.  
5. SOUND BUTTON  
Press the Sound Button to hear cool  
sound effects.  
5
 
6. SEARCHLIGHT BUTTON  
Press the Searchlight Button to turn on  
the searchlight.  
7. LAUNCH BUTTON  
Press the Launch Button to launch the  
rocket.  
8. PROPELLER BUTTON  
Press the Propeller Button to spin the  
propeller.  
9. MOTION SENSOR  
Move the helicopter through the air to hear fun flying sounds!  
10.TURNING THE UNIT OFF/ AUTOMATIC SHUT-OFF  
Slide the ON/OFF switch to OFF or hold the Talk Button for a few  
seconds to turn the unit OFF.  
To preserve battery life, the unit will automatically power-off after  
several minutes without input.  
6
 
HOW TO SWITCH THE HELICOPTER TO A DINO  
1. Helicopter shape.  
2. Fold the wings up.  
3. Turn the feet down.  
4. Flip the legs down.  
5. Fold up the propeller and turn 6. Lift the tail up as far as it will go.  
it forward so that it’s facing  
7
towards the dino’s head.  
 
7. Turn the rear wing at the end  
of the tail back.  
8. Flip the propeller down so that  
it rests within the tail.  
9. Unfold the arms.  
10. Move the arms down.  
11. Move the head down and the 12. Dinosaur shape.  
rocket launcher up.  
Note: To change the dino back into a helicopter, reverse the order of  
8
the steps above.  
 
CARE & MAINTENANCE  
1. Keep the unit clean by wiping it with a slightly damp cloth.  
2. Keep the unit out of direct sunlight and away from any direct heat  
source.  
3. Remove the batteries when the unit is not in use for an extended  
period of time.  
4. Do not drop the unit on hard surfaces and do not expose the unit to  
moisture or water.  
TROUBLESHOOTING  
If for some reason the unit stops working or malfunctions, please follow  
these steps:  
1. Please turn the unit OFF.  
2. Interrupt the power supply by removing the batteries.  
3. Let the unit stand for a few minutes, then replace the batteries.  
4. Turn the unit ON. The unit should now be ready to play again.  
5. If the product still does not work, replace with a new set of batteries.  
If the problem persists, please call our Consumer Services Department  
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a  
service representative will be happy to help you.  
9
 
NOTE:  
This equipment has been tested and found to comply with the limits  
for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
Caution: changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate  
the equipment.  
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC  
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO  
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL  
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY  
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE  
THAT MAY CAUSE UNDESIRED OPERATION.  
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH  
CANADIAN ICES-003.  
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST  
CONFORME À LA NORME NMB-003 DU CANADA.  
 
10  
 

Technicolor Thomson Camcorder 5400LDK User Manual
Technicolor Thomson Stereo System DPL911VD User Manual
Thermo Products Furnace OH6FA072D48B User Manual
Toshiba DVD Player SD P2500 User Manual
Toshiba Scanner MR 3018 User Manual
TP Link Security Camera TL SC2020 User Manual
TP Link Video Games TL SL2428 User Manual
Tripp Lite Network Cables N002 014 WH User Manual
ViewSonic Projector PJ406D User Manual
Vizio Mouse TECRA S10 User Manual