VTech Cordless Telephone 6895 User Manual

Dial the phone number.  
STEP 3 Battery installation  
STEP 1 Check package contents (mi6866)  
-OR-  
Dial the phone number.  
Press  
1. Align the two holes in the plug with the socket pins,  
then snap the plug into place. Place the battery in the  
compartment with the wires in the upper right corner.  
2. Replace cover by sliding it upwards until it clicks into  
place.  
Make sure your phone’s packaging includes the following:  
.
Quick Start Guide  
Receiving a call  
mi6896/6895/6870/6866  
Press  
OFF.  
, SPEAKERPHONE, or any dialing key except  
STEP 1 Check package contents (mi6896/6895)  
Make sure your phone’s packaging includes the following:  
Hanging up  
Press OFF or place the  
handset in its base.  
Handset  
Belt clip  
Charger power adaptors (3)  
Base unit  
STEP 7 Set the Clock  
STEP 4 Charge the battery  
Handsets (4)  
Chargers (3)  
Base unit  
1. Press TIME/SET to listen to the current setting.  
2. Press TIME/SET again to indicate changes needed.  
3. Press CHANGE to change the day, hour, minute, or year.  
1. Place the handset in the base unit/chargers.  
2. Charge the battery for at least 16 hours before first use.  
Telephone line cord  
Battery  
Quick start guide  
4. When you hear the correct setting, press TIME/SET to  
advance to the next setting.  
Batteries (4)  
Belt clips (4)  
Telephone line cord  
Quick start guide  
NOTE:  
If you have caller ID service, the time will automatically  
be updated with the first incoming call after you  
program the year into the system.  
User’s manual  
Base power adaptor  
Wall mount bracket  
User’s manual  
Base power adaptor  
Wall mount bracket  
STEP 1 Check package contents (mi6870)  
STEP 2 Connect power to telephone base/  
chargers  
STEP 8 Record your outgoing announcement  
STEP 5 Connect to phone line  
Plug one end of the telephone line cord into the telephone line  
jack at the bottom of the telephone base. Then plug the other  
end of the cord into the wall telephone outlet.  
Make sure your phone’s packaging includes the following:  
1. Press SETUP, the system announces Announcement.  
Press PLAY or press RECORD. To continue setup, press  
SETUP.”  
2. Press REC/MEMO and speak toward the MIC on the base  
to record an announcement for up to 90 seconds.  
Plug the power adaptor into an electrical outlet not controlled  
by a wall switch, and the connector into the power jack on  
bottom of the telephone base/chargers.  
Telephone outlet  
AC power outlet  
Charger power adaptor  
3. Press PLAY/STOP  
/
( when finished recording).  
AC power outlet  
NOTE:  
For complete feature instructions, please refer to your  
user’s manual.  
Handsets (2)  
Charger  
Base unit  
IMPORTANT!  
If your product is not working properly:  
1. Refer to your user’s manual.  
www vtechcanada.com.  
3. Call our customer service at 1-800-595-9511 or 1-800-267  
7377 in Canada.  
STEP 6 Making and receiving calls  
Making a call  
Batteries (2)  
Belt clips (2)  
Telephone line cord  
Quick start guide  
Press  
or SPEAKER and listen for dial tone.  
NOTE:  
User’s manual  
Base power adaptor  
Wall mount bracket  
Use only the power adaptors supplied with your  
VTech telephone.  
96-006136-020-100  
 

Texas Instruments Car Amplifier TPA2028D1YZFEVM User Manual
The Singing Machine Karaoke Machine Pedestal CDG Karaoke System with built in video camera TV monitor User Manual
Tricity Bendix Freezer TB 45 UF User Manual
Tripp Lite Network Card RELAYIOCARD User Manual
Tyan Computer Network Card TYAN S1472 ATX User Manual
V7 Flat Panel Television LTV19HD User Manual
Verbatim Computer Drive Mini DVDR DL Media User Manual
Vermont Casting Cooktop ACSB User Manual
Vivitar Binoculars VIV AV 1025 User Manual
Vulcan Hart Water System SMF600 User Manual