TABLE OF CONTENTS
INTRODUCTION-----------------------------1
PARTS CHECK LIST-----------------------2
T A
MULTIPLE REDIALING-----------------------12
MEMORY (SPEED) DIAL---------------------12
Programming a Speed Dial Number-------12
Replacing a Speed Dial Number------------12
Clearing a Speed Dial Number--------------12
Storing A Pause In A Speed Dial Number
-------------------------------------------------------12
Speed Number Dialing-------------------------13
LIVE DIALING & PREDIALING----------13
OPTIONAL: HEADSET INSTALLATION
AND OPERATING INSTRUCTIONS-------13
INSTALLATION----------------------------------13
OPERATION--------------------------------------14
MAINTENANCE---------------------------------15
AUTOMATIC SECURITY CODING---------15
IN CASE OF DIFFICULTY--------------------16
WARRANTY STATEMENT-------------------18
TECHNICAL SPECIFICATIONS------------19
FCC & IC REGULATIONS--------------------20
I
M
P
O
R
N
T
S
A
F
E
T
Y
INSTRUCTIONS------------------------------3
REPLACING THE HANDSET BATTERY
PACK-----------------------------4
A WORD ABOUT RECHARGEABLE
BATTERIES-----------------------------------4
SPARE BATTERY CHARGING----------4
GETTING STARTED ----------------------5
SETTING UP YOUR VT9112 ------------5
WALL MOUNTING--------------------------6
HANDSET FEATURES----------------------7
HANDSET DIAGRAM----------------------7
HANDSET INDICATORS------------------7
FUNCTION KEYS----------------------------8
BASE UNIT FEATURES--------------------9
BASE DIAGRAM-----------------------------9
BASE INDICATORS------------------------9
FUNCTION KEYS---------------------------9
BASIC OPERATIONS------------------------9
HOW TO SET TONE/PULSE DIALING
----------------------------------------------------9
MAKING CALLS-----------------------------10
LIVE DIALING & PREDIALING----------10
ANSWERING CALLS---------------------10
DISCONNECTING CALLS--------------10
LINE IN USE---------------------------------10
PAGE/HANDSET LOCATOR-----------10
SETTING HANDSET VOLUME--------11
CHANGING CHANNELS----------------11
TEMPORARY TONE----------------------11
ADVANCED OPERATIONS-------------11
RINGER PROGRAMMING--------------11
Programming The Ringer Type---------11
Turning Off The Handset Ringer----------11
POW
ER
IN USE
CHARG
SPARE BA
TT
ING
PAGE
VT91
12
Made in China
91-5044-11-00
INTRODUCTION
INTRODUCTION
THANK YOU FOR PURCHASING YOUR VTECH TELEPHONE. THE VT9112 IS A 900MHZ
CORDLESS PHONE, WITH THE ADDED CONVENIENCE OF A LIQUID CRYSTAL DISPLAY
FOR CONVENIENT EXAMINATION OF PHONE NUMBERS.
Parts Check List:
1. Handset
2. Base Unit
3. Telephone line cord(clear tip)
4. AC adapter
FEATURES OF THE VT9112
5. Battery Pack
6. Wall mount bracket
7. Belt clip
*
*
*
*
*
*
*
900 MHZ, analog operation
10 channels, with manual channel change (CHAN) key on Handset
12 Digit Liquid Crystal Display on Handset
Headset Capability (with optional 2.5mm headset)
Line In Use indication on Handset Unit
Page / Handset Locator function from Base Unit
20-bit Digital security coding between Handset and Base Unit to minimize the risk of
another cordless phone accessing your phone line
SPARE BATT
CHARGING
I
N
U
S
E
POWER
PAGE
*
*
*
*
*
*
*
*
*
*
*
*
*
10 number Memory Dialing with One Touch access
Predialing function of 20 digits
VT9112
Multiple Redialing (4 buffers x 20 digits)
4 Programmable Handset Ringer Types (plus Ringer OFF)
3-Step Selectable Handset Volume (HI - MID - LO)
3-Step Battery Detection Level shown by LCD icons
Maximum battery life is 7 hours of continuous talk or 7 days of standby on a full charge
Handset Easy Answer feature
HANDSET
BASE UNIT
Temporary Tone dialing
TELEPHONE LINE
CORD
AC ADAPTER
Flash Function
Hearing Aid Compatibility
Spare battery charging Compatibility
Wall-mount Compatibility
BATTERY PACK
WALL MOUNT
BRACKET
BELT
While you are charging your VT9112 for the first time, please read this Instruction Manual. By
being familiar with its operation and features, you will derive the maximum benefit from your
new telephone.
1
2
REPLACING THE HANDSET BATTERIES
1. Remove the battery cover by pressing on
IMPORTANT SAFETY INSTRUCTIONS
disassemble this product,but take it to
a
!
This symbol is to alert you to important
the ridged lines and sliding downward.
qualified serviceman when some service or
repair work is required. Opening or removing
cabinet parts other than specified access
doors may expose you to dangerous voltages
or other risks. Incorrect reassembling can
cause electric shock when the appliance is
subsequently used. In addition, attempting to
service the unit yourself may void your
warranty.
operating or servicing instructions that may appear
in your owner’s manual. Always follow basic safety
precautions when using this product to reduce the
2. Discard the old battery pack. Don't put the
old battery pack in a trash compactor or a
fire - it could burst.
risk of injury, fire, or electric shock.
1. Read and understand all instructions.
2. Follow all warnings and instructions marked
on the product.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for
example, near a bath tub, kitchen sink, or
swimming pool).
IMPORTANT: Do not dispose of this battery
in household garbage. For
information on recycling or
proper disposal, consult your
local solid waste collection or
disposal organization.
11. Do not overload wall outlets and extension
cords as this can result in the risk of fire or
electric shock.
12. Unplug this product from the wall outlet and
refer servicing to qualified service
CAUTION: To reduce the Risk of Fire or
Injury to Persons, Read and
Follow these instructions:
3. Place the new battery pack in the battery
compartment. Make sure the metal
contacts on the underside of the battery are
aligned with charging contacts in battery
compartment.
5. Do not place this product on an unstable cart,
stand, or table. The product may fall, causing
serious damage to the product.
personnel under the following conditions:
a) When the power supply cord or plug is
damaged or frayed.
b) If liquid has been spilled into the product.
c) If the product has been exposed to rain
or water.
d) If the product does not operate normally
by following the operating instructions.
Adjust only those controls that are
covered by the operating instructions
because improper adjustment of other
controls may result in damage and will
often require extensive work to restore
the product to normal operation.
1. Use only VTECH battery.
6. Slots and openings in the cabinet and the back
or bottom are provided for ventilation. To
protect it from overheating, these openings
must not be blocked by placing the product on
the bed, sofa, rug, or other similar surface.
This product should never be placed near or
over a radiator or heat register. This product
should not be placed in a built-in-installation
where proper ventilation is not provided.
7. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply to your home, consult your dealer or
local power company.
2. Do not open or mutilate the battery.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may
be toxic if swallowed.
4. Replace the battery cover by sliding it into
place.
5. The new battery pack must be charged
before using your telephone. Place the
handset in the cradle of the base unit to
allow it to charge for 24 hours. Maximum
battery life between charges is more than
7 hours of continuous talk time or 7 days of
standby.
3. Exercise care in handling batteries in order
not to short the battery with conducting
materials such as rings, bracelets, and
keys. The battery or conductor may
overheat and cause burns.
4. Do not dispose of the battery in a fire. The
cell may explode.
e) If the product has been dropped and the
cabinet has been damaged.
SPARE BATTERY CHARGING
A WORD ABOUT RECHARGEABLE
BATTERIES
1. Spare Battery Compartment is provided
in the Base Unit for charging spare
battery.
f) If the product exhibits a distinct change
in performance.
8. Do not allow anything to rest on the power
cord. Do not locate this product where the cord
will be abused by persons walking on it.
9. Never push objects of any kind into this product
through cabinet slots as they may touch
dangerous voltage points or short out parts
that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the
product.
1. Your NiCad battery pack recharges
whenever the Handset is returned to the
Base Unit.
13. Avoid using
a
telephone (other than
a
2. Open the compartment door and place
the spare battery pack into the
compartment.
cordless type) during an electrical storm.
There may be a remote risk of electric shock
from lighting.
14. Do not use the telephone to report a gas leak
in the vicinity of the leak.
3. Make sure the metal contacts on the
underside of the battery are aligned with
charging contacts in the battery
compartment.
2. To maximize the life of your battery pack,
do not return your VT9112 Handset to the
Base Unit cradle for recharging until the
LCD indicates LOW BATTERY LEVEL.
10. To reduce the risk of electric shock, do not
4. Then, close the battery cover tightly.
SAVE THESE INSTRUCTIONS
4
3
BASIC OPERATIONS
ADVANCED OPERATIONS
SETTING HANDSET VOLUME
mode, this feature allows you to enter
MULTIPLE REDIALING
Replacing a Speed Dial Number
special codes and tones to operate
answering machines, use electronic
banking services, calling cards, or other
special services.
If you want to replace a speed dial number,
simply follow the above steps. Your new
speed dial number will replace the previous
one in that memory location.
Set the Handset volume switch to High, Mid
or Low , depending on your preference.
VT9112 contains a history of 4 previous
telephone numbers dialed from the phone.
To redial one of these telephone numbers:
The Volume switch is located on the left-hand
edge of the handset (with the keypad facing
towards you, and the antenna pointing up).
1. Before pressing PHONE, press REDIAL/
PAUSE key, the last telephone number
dialed is retrieved.
*
*
First, dial the call normally.
Then, activate the Temporary Tone
feature by pressing TONE (the * key).
You can then press the numbers or
symbols you need, and your phone will
send the signals by tone dialling.
Clearing a Speed Dial Number
2. Press REDIAL/PAUSE more times, the
second, third, and fourth redial telephone
numbers can be retrieved.
If you want to clear a speed dial number,
simply follow the above steps, but press
MEM without entering any number.
CHANGING CHANNELS
If you notice interference when using your
handset, press CHAN key to switch to a clear
channel. This function is only available when
you are on a call.
3. If REDIAL/PAUSE is pressed for 5 times,
the first redial number will be shown again.
*
To end the call, press OFF or place the
handset back on the base. The phone
will automatically go back to PULSE
mode.
Storing A Pause In A Speed Dial Number
4. Check if one of these numbers is
appropriate. Press PHONE to dial out this
telephone number. Or press OFF to quit
this function.
To insert a pause in a phone number, just
press REDIAL/PAUSE key between any two
digits you want to insert the pause. The LCD
will display the telephone number with digit
‘P’ between the digits. This indicates an
additional 2-second pause being added
between the digits when the line is connected
and the phone number is dialed.
TEMPORARY TONE
If you have a rotary (dial-pulse) telephone
service, and your telephone is set to PULSE
MEMORY (SPEED) DIAL
Up to 10 frequently dialed phone numbers
can be programmed into your VT9112 Speed
Dial Memory. Each phone number can
contain a maximum of 20 digits.
For example:
If your phone is connected to a PBX, you can
store the PBX access number and PAUSE
before the phone number. For example, to
store 9-PAUSE-555-1234 in memory location
8, do the following:
ADVANCED OPERATIONS
RINGER PROGRAMMING
*
Press MEM to save the new setting, or
press OFF to discard changes.
Programming a Speed Dial Number
You can select from 4 different Handset
ringer types. You can also program the
ringer OFF.
To program a phone number into memory,
the Handset must be OFF.
1. Press PROG
Turning Off The Handset Ringer
*
Press PROG. The LCD will show MEM_ to
prompt you to enter the number of memory
location.
2. Press 8 (memory location)
3. Press 9
(To program, the Handset must be OFF)
Programming The Ringer Type
*
Press PROG TWICE, the LCD will
indicate the current ringer type.
4. Press REDIAL/PAUSE key
*
*
Press the number of the memory location
you wish to store the number (0 – 9).
(To program, the Handset must be OFF)
*
*
Press 0 to turn off the ringer
5. Enter 555-1234 (LCD now shows
*
Press PROG TWICE, the LCD will
indicate the current ringer type, e.g. BELL
1 (for ringer type 1).
Dial the number you want to store. The
number may be up to 20 digits long. The
number can be entered manually or by
using REDIAL.
Press MEM to save the new setting, or
press OFF to discard changes.
“9P5551234”)
6. Press MEM
*
Press a key 1,2,3 or 4 to select a ringer
*
To turn the ringer on again, see
Programming The Ringer Type
type.
*
Press MEM to save the phone number or
press OFF to discard the change and exit
the program.
11
12
OPTIONAL HEADSET INSTALLATION
AND OPERATING INSTRUCTIONS
OPTIONAL HEADSET INSTALLATION
AND OPERATING INSTRUCTIONS
OPTIONAL HEADSET INSTALLATION
AND OPERATING INSTRUCTIONS
ADVANCED
OPERATIONS
Your VT9112 cordless telephone is equipped
with a 2.5mm Headset Jack for use with an
optional accessory Headset for hands-free
operation.
Speed Number Dialing
PUSH THE BELT CLIP
ONTO THE HANDSET
*
For Live Dialing
1. Press PHONE to get a dial tone.
2. Press MEM and the memory location
number key (0-9) to dial the
If you choose to use the Headset option, you
must do the following:
corresponding speed dial number.
INSTALLATION
*
Obtain an optional accessory Headset,
which is compatible with the VT9112.
* For Predialing
1. Press MEM and the memory location
number key (0-9) to retrieve the
corresponding speed dial number.
ON RIGHT EAR
ON LEFT EAR
Please contact VTECH Communications
Customer Service, in the U.S. toll-free at
1-800-595-9511,in the Canada call 1-800-
267-7377 for dealer information in your local
area. You can also purchase a compatible
Headset directly from VTECH
2. Check its correctness and append any
digit to it if necessary.
3. Press PHONE to dial the phone number.
OPERATION
Communications Customer Service.
*
NOTE: Whenever a compatible
Headset is connected to the cordless
Handset, the microphone on the
Handset will be MUTED. This is done
to limit the effect of background noise.
One-Touch Speed Dialing
If you are sure a memory location number
(0-9) contains the telephone number you
want to dial, just press and hold this
number key for 2 seconds. Your phone will
automatically connect the line and dial out
this telephone number.
*
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on the
Handset of your VT9112. Connect the
plug on the Headset to the jack on the
cordless Handset. The plug should fit
securely. Do not force the connection.
See illustration.
*
*
*
The following operational characteristics
apply to VTECH Headsets. the same
may also apply to other (non-VTECH)
compatible headsets, but VTECH
assumes no responsibility for their
performance.
HANDSET JACK LOCATION
AND CONNECTION WITH PLUG.
*
For maximum sound quality, the flexible
microphone should be positioned at the
corner of your mouth, about one inch from
your mouth.
The VTECH brand compatible Headset
has a monaural design which is
reversible, so you can wear your
Headset on either the left or right ear,
leaving one ear free for room
conversation.
The headband can be adjusted to fit the
contour of your head. Using both
hands, slide the headband up or down
so that it rests comfortably on your
head with the speaker cushion centered
against your ear.
ONE
INCH
*
The VT9112 is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the belt clip with the
notches on the side of the VT9112
handset. The belt clip should snap
securely into place. Do not force the
connection. See Illustration
13
14
IN CASE OF DIFFICULTY
MAINTENANCE
If you have difficulty operating your phone, the
suggestions below should solve the problem.
If you still have difficulty after trying these
Pick up the handset and press PHONE.
TAKING CARE OF YOUR TELEPHONE
.
Electrical Storms
Your VTECH 9112 cordless telephone
contains sophisticated electronic parts so it
must be treated with care.
Electrical storms can sometimes cause power
surges harmful to electronic equipment.
For your own safety, use caution when using
electric appliances during storms.
NO DIAL TONE.
suggestions,
*
*
First check all the suggestions above.
In the US call:
If you still don’t hear a dial tone,
disconnect the base unit from the
telephone jack and connect a different
phone. If there is no dial tone on that
phone either, the problem is in your wiring
or local service. Call your local telephone
company.
Avoid rough treatment
VTECH Communications at
1-800-595-9511.
Place the handset down gently. Save the
original packing materials to protect your
telephone if you ever need to ship it.
Cleaning your telephone
Your telephone has a durable plastic casing that
should retain its luster for many years. Clean
it only with a soft cloth slightly dampened with
water or a mild soap. Do not use excess water
or cleaning solvents of any kind.
In the Canada call:
VTECH Electronics at
1-800-267-7377.
Avoid Water
Your telephone can be damaged if it gets
wet. Do not use the handset outdoors in the
rain, or handle it with wet hands. Do not
install your base unit near a sink, bathtub or
shower.
THE PHONE DOESN’T WORK AT ALL.
YOU GET NOISE, STATIC, OR A WEAK
SIGNAL WHEN YOU’RE NEAR THE
BASE UNIT.
AUTOMATIC SECURITY CODING
*
*
Make sure the power cord is plugged in.
Your VT9112 phone is factory set with one of
1,048,576 possible security codes. This unique
security code allows your handset and base to
recognize each other, and minimizes the
possibility of another cordless phone using your
telephone line. The security code will be kept
even in case of power failure or handset battery
being disconnected.
Make sure the telephone line cord is
plugged firmly into the base unit and the
telephone wall jack.
*
Place the handset in the base
Remember that electrical appliances can
cause serious injury if used when you are
wet or standing in water. If your base unit
should fall into water, DO NOT RETRIEVE
IT UNTIL YOU UNPLUG THE POWER
CORD AND TELEPHONE LINE CORDS
FROM THE WALL. Then pull the unit out
by the unplugged cords.
momentarily to reset the security code.
Then press PHONE to get a line.
*
*
Make sure the handset battery is installed.
If the base CHARGING LED flashes when
handset is put onto the base, then handset
battery may not be inserted well.
Household appliances plugged into the
same circuit as the base unit can
sometimes cause interference. Try moving
the apppliance or the base unit to another
outlet.
Make sure the batteries are properly
charged. If the handset make two beeps,
or the BATTERY LEVEL INDICATOR
shows LOW BATTERY LEVEL, the
battery needs charging. If IN USE
indicator at base or PHONE indicator at
handset do not light when you press
PHONE button, you must charge the
batteries.
YOU GET NOISE, STATIC, OR A WEAK
SIGNAL WHEN YOU’RE AWAY FROM
THE BASE UNIT.
*
You may be out of range. Either move
close to the base, or relocate the base
unit.
*
If you recently installed a new battery
pack, make sure it is installed correctly.
*
The layout of your home may be limiting
the range. Try moving the base unit to
the second or third floor.
Follow the procedure below:
1. Remove battery from handset.
2. Replace battery in handset.
THE HANDSET DOES NOT RING WHEN
YOU RECEIVE A CALL.
*
Make sure your handset ringer is turned
on.
3. Place the handset in the charge cradle.
Wait 60 seconds.
16
15
WARRANTY STATEMENT
IN CASE OF DIFFICULTY
operating on the same channel. Place
*
Make sure the telephone line cord is
plugged firmly into the base unit and the
telephone jack. Make sure the power
cord is plugged in.
WHAT DOES OUR WARRANTY COVER?
Any defect in material or workmanship.
FOR HOW LONG AFTER THE ORIGINAL PURCHASE?
To the original purchaser only - ONE YEAR.
WHAT WILL VTECH DO?
At our option, repair or replace your unit.
HOW DO I SEND MY UNIT, IN OR OUT OF WARRANTY?
the handset in the cradle for a few
moments to reset the channel.
*
*
*
*
You may be too far from the base unit.
COMMON CURE FOR ELECTRONIC
EQUIPMENT
You may have too many extension
phones on your telephone line to allow
all of them to ring. Try unplugging some
of the other phones
*
Electronics, like people, can sometimes get
confused. If the unit does not seem to be
responding normally, then try putting the
handset in the cradle to re-initialize the unit.
If it still does not seem to respond after
doing this a few times, do the following (in
the order listed):
*
In the U.S. Call VTECH Communications customer service for Return Authorization at:
1-800-595-9511
in Canada call VTech Electronics at
1-800-267-7377
YOUR CALLER FADES IN AND OUT.
You may be nearly out of range. Move
closer, or relocate the base.
*
*
Properly pack your unit. Include any cables & accessories which were originally provided with the
product. We recommend using the original carton and packing materials.
Include in the package a copy of the sales receipt or other evidence of date of original purchase (if
the unit was purchased within the last twelve months).
Print your name and address, along with a description of the defect, and include this in the package.
Include payment for any service or repair not covered by warranty, as determined by VTECH
Communications.
1. Disconnect the power to the base.
2. Disconnect the handset battery.
3. Wait a few minutes.
*
*
YOU HEAR OTHER CALLS WHILE
USING YOUR PHONE.
*
In U.S. ship the unit via UPS Insured, or equivalent to:
*
Replace the handset in the base cradle,
wait a few moments and try again.
4. Connect power to the base.
5. Connect the handset battery.
VTECH COMMUNICATIONS
8770 SW NIMBUS AVENUE
BEAVERTON, OREGON 97008
In Canada ship to :
*
Disconnect your base unit from the
telephone jack, and plug in a regular
telephone. If you still hear other calls,
the problem is probably in your wiring or
local service. Call your local telephone
company.
6. Put the handset in the base to re-
initialize.
VTECH ELECTRINICS
200-7671 ALDERBRIDGE WAY
RICHMOND, B.C. V6X 1Z9
.
VTECH Communications assumes no responsibility for units sent without prior Return
Authorization.
YOU HEAR NOISE IN THE HANDSET,
AND NONE OF THE KEYS OR
BUTTONS WORK.
WHAT DOES OUR WARRANTY NOT COVER?
*
*
*
*
*
Batteries
*
*
Make sure the power cord is plugged in.
Your base unit and handset may not be
Damage from misuse, neglect, or acts of nature (lightning, floods, power surges, etc.)
Products which may have been modified or incorporated into other products
Products purchased and/or operated outside the USA, its territories, or Canada.
Products serviced by the owner or a service facility not expressly authorized by VTECH
Communications
*
*
Products purchased more than 12 months from current date
Units purchased in “AS IS” condition, or units purchased as “Distressed Merchandise”.
HOW DOES STATE LAW AND PROVINCIAL LAW RELATE TO THIS WARRANTY?
*
This warranty gives you specific rights. You may also have other rights which vary from state to
state or from province to province.
17
18
FCC AND IC REGULATIONS
TECHNICAL SPECIFICATIONS
This equipment complies with Parts 15 and
68 of the Federal Communications
Commission (FCC) rules for the United
States. It also complies with regulations
RSS-210 and CS-03 of Industry Canada
(IC).
distance - which will depend on the location
of the base unit and handset, weather, and
the construction and layout of your home or
office.
FREQUENCY CONTROL
SIZE
Crystal Controlled Dual PLL Synthesizer
Handset:
17.5cm x 5.5cm x 4.5cm
(L x W x T) maximum
(antenna excluded)
TRANSMIT FREQUENCY
Base:
20.3cm x15.2cm x 6.0cm
(L x W x T) maximum
(antenna excluded)
Handset:
925.05 MHz to 927.75
MHz (All ten channels
within this range)
FCC Part 15
Warning: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
A label is located on the underside of the
base unit containing either the FCC
registration number and Ringer Equivalence
Number (REN) or the IC registration number
and Load Number (LN). You must, upon
request, provide this information to your
local telephone company.
WEIGHT
Base:
902.3 MHz to 905.0
MHz (All ten channels
within this range)
Handset:
160 grams (excluding battery);
240 grams (including battery)
320 grams
Base:
The equipment has been tested and found
to comply with part 15 of the FCC rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
RECEIVE FREQUENCY
POWER REQUIREMENTS
Handset: Self-contained nickel-
Handset:
902.3 MHz to 905.0
MHz (All ten channels
within this range)
cadmium rechargeable
battery supply, 3.6V nominal,
600mAh capacity.
This equipment is compatible with
inductively coupled hearing aids.
Base:
925.05 MHz to 927.75
MHz (All ten channels
within this range)
Power Adaptor: 9VDC @ 300mA
Should you experience trouble with this
telephone equipment, please contact:
SPECIFICATIONS ARE TYPICAL AND MAY
CHANGE WITHOUT NOTICE
NOMINAL EFFECTIVE RANGE
In the United States:
Maximum power allowed by FCC and IC.
Actual operating range may vary according
to environmental conditions at the time of
use.
VTECH COMMUNICATIONS
1-800-595-9511
determined by turning the equipment off and
on, the user is encouraged to try and correct
the interference by one or more of the
following measures:
In Canada:
VTECH ELECTRONICS
1-800-267-7377
*
*
*
Reorient or relocate the receiving
antenna.
for repair/warranty information. The
telephone company may ask you to
disconnect this equipment from the line
network until the problem has been
corrected.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet or
on a circuit different from that to which
the receiver is connected.
Your VTECH VT9112 is designed to operate
at the maximum power allowed by the FCC
and IC. This means your handset and base
unit can communicate only over a certain
*
Consult the dealer or an experienced
radio / TV technician for help.
19
20
FCC AND IC REGULATIONS
FCC AND IC REGULATIONS
Users should ensure for their own protection
This device complies with RSS-210 of
Industry Canada. Operation is subject to the
following two conditions: (1) this device may
not cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device.
FCC Part 68
The REN is useful in determining the
that the electrical ground connections of the
power utility, telephone lines and internal
metallic water pipe system, if present, are
connected together. This precaution may be
particularly important in rural areas.
number of devices you may connect to your
The FCC requires that you connect your
cordless telephone to the nationwide
telephone network through a modular
telephone jack (USOC RJ11C or RJ11W).
telephone line and still enable the devices to
ring when you receive a call. The general
rule is that the REN value should not
exceed 5.0 total; however, contact your local
telephone company for the specific number
in your area.
Your telephone company may discontinue
your service if your equipment causes harm
to the telephone network. They will notify
you in advance of disconnection, if possible.
During notification, you will be informed of
your right to file a complaint with the FCC.
Caution: Users should not attempt to make
such connections themselves, but should
contact appropriate electric inspection
authority, or electrician, as appropriate.
IC (Industry Canada)
This telephone is registered for use in
Canada.
The Load Number (LN) assigned to this
device denotes the percentage of the total
load to be connected to a telephone loop
which is used by the device to prevent
overloading. The termination on a loop may
consist of any combination of devices subject
only to the requirement that the total of the
load numbers of all devices does not exceed
100.
Occasionally, your telephone company may
make changes in its facilities, equipment,
operation, or procedures that could affect
the operation of your equipment. If so, you
will be given advance notice of the change
to give you an opportunity to maintain
uninterrupted service.
Notice: The Industry Canada label identifies
certified equipment. This certification
means that the equipment meets
certain telecommunications network,
protective, operational and safety
requirements. Industry Canada
does not guarantee the equipment
will operate to the user’s satisfaction.
The base unit contains no user serviceable
parts. The handset contains a user
replaceable battery pack.
Before installing this equipment, users should
ensure that it is permissible to be connected
to the facilities of the local telecommunications
company. The equipment must also be
installed using anacceptable method of
connections. The customer should be aware
that compliance with the above conditions may
not prevent degradation of service in some
situations.
If it is determined that your telephone
equipment is malfunctioning, the FCC
requires that it not be used and that it be
unplugged from the modular jack until the
problem has been corrected. Repairs to this
telephone equipment can only be made by
the manufacturer or its authorized agents or
by others who may be authorized by the
FCC. For repair procedures, follow the
instructions outlined under the VTECH
Limited Warranty.
Repairs to certified equipment should be
made by an authorized Canadian
maintenance facility designated by the
supplier. Any repairs or alterations made by
the user to this equipment, or equipment
malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
This equipment may not be used on coin
service lines provided by the phone
company or on party lines.
22
21
|