VTech Musical Instrument sit to stand User Manual

User's Manual  
Sit-To-Stand™  
Activity Walker  
© 2003 VTech  
Printed in China  
91-01590-005-000  
 
INTRODUCTION  
Thank you for purchasing the VTech® Sit-To-StandActivity Walker  
learning toy!  
The VTech® Sit-To-Stand™ Activity Walker is uniquely designed for  
toddlers 9 months and up. It’s filled with entertaining and learning  
features that “grow” along with baby, from one developmental stage to  
the next! When baby is still stationary, the unit can be used as a sitting  
activity station.As baby becomes steadier on her feet, the unit converts  
into a walker, encouraging first steps.  
ON/OFF/VOLUME  
CONTROL SWITCH  
STEERING WHEEL  
ROLLER BALL  
PUPPY  
JOYSTICK  
ADJUSTABLE  
MIRROR  
TURNING KEY  
SLIDE  
SWITCH  
LIGHT-UP  
PIANO KEYS  
ARROW  
BUTTONS  
WHEEL  
LOCK  
 
2
INCLUDED IN THIS PACKAGE  
- One VTech® Sit-To-Stand™ Activity Walker activity panel  
- One walker base  
- Two legs  
- One handle  
- One instruction manual  
WARNING: All packing materials, such as tape, plastic sheets,  
wire ties and tags are not part of this toy, and should  
be discarded for your child’s safety.  
GETTING STARTED  
BATTERY INSTALLATION  
1. Make sure the unit is turned OFF.  
2. Locate the battery cover on the bottom of the panel. Use a coin or  
screwdriver to loosen the screw.  
3. Install 3 new “AA” (UM-3/LR6) batteries  
following the diagram inside the battery box.  
(The use of new alkaline batteries is  
recommended for maximum performance.)  
4. Replace the battery cover and tighten the  
screw to secure the battery cover.  
BATTERY NOTICE  
Install batteries correctly observing the polarity ( +, - ) signs to  
avoid leakage.  
Do not mix old and new batteries.  
 
3
Do not use batteries of different types.  
Remove exhausted or new batteries from the equipment when the  
unit will not be used for an extended period of time.  
Do not dispose of batteries in fire.  
Do not attempt to recharge ordinary batteries.  
The supply terminals are not to be short-circuited.  
Only batteries of the same and equivalent type as recommended  
are to be used.  
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE  
BATTERIES.  
With the VTech® Sit-To-StandActivity Walker safety comes first:  
To ensure your child’s safety, the assembly of this product is an adult  
activity, not a child’s activity. Please ensure that the legs, handle and  
activity panel are securely locked into position to avoid injury.  
ASSEMBLY INSTRUCTIONS  
1. Put the blue base upright on the floor.  
2. Insert the red legs into the holes on  
the blue base according to the  
symbols located on the legs and  
base. Please ensure the legs are fully  
inserted and secured in the base.  
 
4
3. Attach and lock the handle securely  
on to the top of legs.  
4. Attach the activity panel facing you for the Sitting Mode or the  
upright position for the Walker Mode. Insert the walker legs into  
the holes on the bottom of the activity panel.  
Walker Mode  
Sitting Mode  
PRODUCT STORAGE  
1. To remove the activity panel, locate  
the release buttons on the bottom of  
the activity panel. Push the release  
buttons towards the center of the unit.  
 
5
2. Remove the handle by pressing the  
release button located below the  
handle on the right side.  
3. Unlock the legs by pressing firmly on  
the release buttons on the underside  
of the blue base.  
PRODUCT FEATURES  
1. ON/OFF/VOLUME CONTROL SWITCH  
To turn the unit ON, slide the ON/  
OFF/VOLUME CONTROL SWITCH  
to the LOW VOLUME ( ) or the  
HIGH VOLUME (  
) position. To  
turn the unit OFF, slide the ON/OFF/  
VOLUME CONTROL SWITCH to  
the OFF ( ) position.  
2. AUTOMATIC SHUT-OFF  
To preserve battery life, the VTech® Sit-To-Stand™ Activity  
Walker will automatically power-down after several minutes without  
input. The unit can be turned on again by pressing any of the animal  
buttons.  
 
6
3. THREE POSITIONS OF PLAY  
The three positions of play include Sitting Mode, Carry-along  
Mode, and Walker Mode. Change the mode of play by moving  
the activity panel.  
Sitting Mode  
Carry-along Mode  
Walker Mode  
4. WHEEL LOCK  
Slide the wheel lock switch on the  
base of the walker to lock the position  
to secure the wheels while in the  
Sitting Mode.  
Remember to unlock the wheel lock  
before playing in the Walker Mode.  
5. DEMO TAB  
Before initial use, please check to be sure that the demo tab located  
on the bottom cabinet has been removed. If the demo tab is not  
removed, the unit will continue to operate in the demo mode.  
 
7
ACTIVITIES  
1. Attach the acitivity panel facing you to activate the Sitting Mode.  
Turn the unit ON and select a mode. Choose from the following  
modes:  
Steering Wheel = Animals  
Puppy Joystick = Counting  
Turning Key = Colors  
Mirror = Sounds  
Slide Switch = Music  
Press the light-up piano buttons, arrow buttons or roll the ball to  
hear a response related to the selected mode. The unit will  
automatically default to the Animal Mode when first turned on.  
2. Detach the activity panel from the  
legs to select the Carry-along Mode.  
All of the features function the same  
as in the Sitting Mode.  
3. Attach the activity panel in the upright position to select the Walker  
Mode. All of the manipulative features will play fun driving phrases  
and sounds. Push the walker forward and hear fun rewarding  
phrases.  
 
8
MELODY LIST  
1. Old MacDonald Had a Farm  
2. Row, Row, Row Your Boat  
3. Sing a Song of Sixpence  
4. The Entertainer  
5. Can Can  
6. Eine Kleine Nachtmusik  
7. Jack and Jill  
8. Skip to My Lou  
9. The Farmer in the Dell  
10. Pop! Goes the Weasel  
11. London Bridge is Falling Down  
12. Brahms’ Lullaby  
13. Mary Had a Little Lamb  
CARE & MAINTENANCE  
1. Keep the unit clean by wiping it with a slightly damp cloth.  
2. Keep the unit out of direct sunlight and away from any direct heat  
source.  
3. Remove the batteries when the unit is not in use for an extended  
period of time.  
4. Do not drop the unit on hard surfaces and do not expose the unit  
to moisture or water.  
 
9
TROUBLESHOOTING  
If for some reason the program/activity stops working, please follow  
these steps:  
1. Please turn the unit OFF.  
2. Interrupt the power supply by removing the batteries.  
3. Let the unit stand for a few minutes, then replace the batteries.  
4. Turn the unit ON. The unit should now be ready to play again.  
If the problem persists, please call our Consumer Services Department  
at 1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada, and a  
service representative will be happy to help you.  
IMPORTANT NOTE:  
Creating and developing Smart Start® products is accompanied  
by a responsibility that we at VTech® take very seriously. We make  
every effort to ensure the accuracy of the information, which forms  
the value of our products. However, errors sometimes can occur.  
It is important for you to know that we stand behind our products  
and encourage you to call our Consumer Services Department at  
1-800-521-2010 in the U.S., or 1-800-267-7377 in Canada, with  
any problems and/or suggestions that you might have. A service  
representative will be happy to help you.  
 
10  
NOTE:  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used  
in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
 
11  

Taylor Blender shake slush freezer User Manual
Tech Craft TV Video Accessories BEL410B User Manual
Tektronix Network Card Spectrum Analyzer User Manual
TRENDnet Router Net Spot Wireless Access Point User Manual
Tripp Lite Network Cables N001 005 BL User Manual
Tyco Electronics Network Card PL0349 User Manual
Ultratec Printer PRO80TM User Manual
Unitech Network Card 103 User Manual
Vizio TV Antenna M422i B1 User Manual
Waves Network Card DLA User Manual