VTech Telephone BS5822 User Manual

Users Manual  
Model: BS5822  
 
Table of contents  
Program the voicemail key                            27  
Program the play key                                 27  
Program the skip key                                  28  
Program the erase key                                28  
Reset all codes                                        28  
Custom pay-per-use (PPU) features                     29  
PPU keys on handset                                 29  
Change PPU key setting                              29  
Change auto call back number                       29  
Change 3-way calling number                         30  
Change repeat dialing number                        30  
Reset all codes                                        30  
Headset                                               31  
Operating range                                       31  
Batteries                                                 32  
Battery care and maintenance                        32  
Replacing the handset battery                        32  
Additional information                                 33  
Troubleshooting                                         33  
Maintenance                                             39  
Warranty                                                 39  
Important safety instructions                             40  
FCC, ACTA and IC regulations                          41  
The RBRC® seal                                         42  
Technical specifications                                 43  
Index                                                     44  
 
Before you begin  
Parts checklist:  
1  Handset  
2  Base unit  
Important!  
Before using this  
telephone, you  
must read the  
important safety  
instructions on  
page 40  
3  Base wall mount bracket  
4  Battery  
5  Telephone line cord  
6  Belt clip  
7  AC power adaptor  
8  User’s manual  
Base wall  
Handset  
Base unit  
mount bracket  
Telephone line cord  
Belt clip  
Battery  
AC power adaptor  
User’s manual  
3
 
Installation  
Choose a location  
Install handset battery  
For maximum performance of your  
cordless telephone system:  
1  Choose a central location for your  
1  Align the two holes in the plug with  
the socket pins, then snap the plug  
into place  
2  Place the battery in the compartment with  
the wires in the upper left corner  
3  Replace cover by sliding it upwards until  
base unit  
2  Install your base unit and extension  
handsets away from electronic  
equipment, such as personal  
computers, television sets and  
microwave ovens  
3  In locations where there are multiple  
cordless telephones, separate base  
units as much as possible  
it clicks into place  
4  Be sure to charge the battery in the  
handset for a minimum of 16 hours before  
using your phone  
4  Installyourtelephoneequipmentaway  
from heat sources and sunlight  
5  Avoid excessive moisture, dust or  
extreme cold  
2
1
 
Installation  
Table/desk installation  
Connect the power cord  After  
charging the battery for at least  
16 hours, connect the telephone  
line cord  
Install the base  
unit away from  
electronic  
equipment such  
as personal  
computers,  
Modular  
telephone jack  
Standard  
electrical outlet  
television sets or  
microwave ovens  
Avoid excessive  
heat, cold, dust or  
moisture  
 
Installation  
Charge the handset battery  
Place the handset in the base  Be sure to charge the battery for at least 16 hours before using your  
phone  
Your phone  
contains an internal  
noise filter (for DSL  
subscribers)  This  
means, If you  
Check for dial tone  
After the batteries are charged, pick up the handset and press ON; you should hear a dial tone  If  
you do not, try this phone in another phone jack  
subscribe to DSL  
service, you  
shouldn’t  
experience  
Belt clip (optional)  
Your phone can operate up to four handsets  To order additional handsets call the supplier  
interference or  
noise when using  
your phone due to  
your DSL service  
 
Installation  
To register your accessory handsets  
ENTER BASE ID  
###############  
Your phone comes with a handset which is already registered as  
Handset 1  Your phone can operate up to four handsets, to order  
additional handsets call the supplier  
The 15-digit base  
ID code may  
contain numbers  
and characters,  
including 0  
through 9 and *  
Make sure you  
enter all 15 digits  
1  After charging the battery, the screen will display:  
2  On the base unit, press MENU/SEL, then scroll to DISPLAY BASE  
SEARCHING...  
HANDSET 2  
ID, press MENU/SEL  
3  Enter the 15 digit base unit ID code, if you make a mistake, press the  
DELETE/MUTE key to backspace (delete characters), then enter  
the correct information  
4  Press MENU/SELECT to complete the registration process  
5  Once a valid base ID code has been entered, the display will go  
blank for a second or two, and then show:  
6  If the base accepts the new handset, after several seconds the new  
If you do not  
enter the correct  
digit sequence,  
you will hear an  
error tone  Press  
DELETE/MUTE  
key to backspace  
to erase a  
SEARCHING...  
handset will show:  
character(s) and  
carefully re-enter  
the base ID code  
Re-register existing handsets to a new base  
1  Install your new base unit, the handset(s) will display SEARCHING…,  
press and hold the MENU/SELECT button for two seconds  
ENTER BASE ID  
###############  
2  The handset will display:  
3  Follow steps 2 through 6 in To register your accessory handsets,  
above  
 
Wall mounting (optional)  
The wall mount brackets are designed for use on standard wall mount plates only  
1  Follow the instructions on page 6 to connect the power to base and phone line  
Install the base  
unit away from  
electronic  
equipment such  
as personal  
2  Line up the tabs on the wall mount adaptor with the holes at the bottom of the base  Snap the wall  
mount bracket firmly in place.  
3. Mount the telephone base on the wall. Position the telephone base so that the mounting studs fit  
into the holes on the wall mount bracket  Slide telephone base down on the mounting studs until  
it locks into place  
computers,  
television sets or  
microwave ovens  
Avoid excessive  
heat, cold, dust or  
moisture  
 
Handset and base indicators  
Handset display  
Icon  
MUTE  
NEW  
Description  
Turns on when the microphone is muted  
Turns on when there are new call log entries  
Turns on when the ringer is muted  
Low battery indicator and charging indicator  
LED is on when in handsfree mode  
VOICEMAIL  
On when new voicemail is detected  Service must be subscribed through your  
local telephone company  
Base display  
Icon  
IN USE  
Description  
On when the phone is off hook  
CHARGE  
VOICEMAIL  
On when the handset is charging in the base  
On when new voicemail is detected  Service must be subscribed through  
your local telephone company  
9
 
Handset layout  
1  Antenna  
2  CID  
3  Redial/pause  
4. On/flash  
5  Dialing key (0 - 9, *, #)  
6  Voicemail  
7  Play  
8  Skip  
9  Menu/select  
10  
Phonebook/  
11  Speaker  
12  Mute/delete  
13  Off/clear  
14  Billed services  
15  Intercom  
16  Erase X  
16  
ꢀ0  
 
Base unit layout  
1  Intercom  
2  In use  
3  Voicemail  
4  Charge  
ꢀꢀ  
 
Handset operation  
Making calls  
Press ON (or, SPEAKER (  
Dial the phone number  
-OR-  
) to use the handset speakerphone feature)  
Use FLASH to  
access other  
phone company  
subscriber  
services, as  
described by your  
provider  
Dial the phone number first; then press ON or SPEAKER (  
)  
As you are entering numbers, press DELETE/MUTE or OFF/CLEAR to  
backspace and make corrections, or press and hold PAUSE to enter a three  
second dialing pause  Press OFF to end your call  
To end a  
conference call,  
press OFF at  
the handset  
The conference  
call will not be  
terminated until  
all handsets have  
disconnected  
from the call  
Answering calls  
Press ON, SPEAKER or any of the number keys  
Press OFF to end your call  
Flash function  
You can use your phone with services such as call waiting  When you receive a call waiting signal,  
simply press the FLASH key to switch to the new call  Press FLASH again to switch back to the  
original call  
Redial  
Press REDIAL to display the last telephone number dialed from the handset or base unit (up to  
32 digits)  Use or to scroll through the five previously dialed numbers.  
When the beginning or the end of the redial list is reached, a double beep will sound  
When the desired number is reached, press ON or SPEAKER ( ) to dial  
• Press DELETE/MUTE on the handset to delete the number from the redial memory  
Press OFF/CLEAR on the handset to exit the redial review list  
ꢀꢁ  
 
Handset operation  
Mute  
PHONE  
MICROPHONE MUTED  
MUTE  
00:00:25  
• During an active call, press the MUTE key on handset to disable  
the microphone  The screen will display:  
• Press MUTE again to return to normal two way conversation  
If the returned  
call is not  
answered within  
30 seconds, the  
external call  
will end  
automatically  
While in transfer  
mode (before  
releasing the  
MICROPHONE ON will display briefly.  
Conference call  
Your phone is capable of supporting conference calls between system handsets  It is possible to  
establish a conference between any two handsets and the external line  
If a handset already has a connection to the external line, and any  
other handset goes off-hook, a conference is immediately established  
The handsets will show:  
PHONE  
00:00:25  
call) you may  
toggle back and  
forth between  
the external call  
(the display will  
show OUTSIDE)  
and the intercom  
call (the display  
will show  
Volume control  
Press the VOLUME button on the handset to adjust listening volume  Each button press raises or  
lowers volume by one level  When you change the volume level, the new setting is saved  The new  
volume level will be applied each time you use the handset, speakerphone or headset  
Transferring calls  
You can transfer calls between any handsets registered to it  
While you are on an external call, Using Transfer allows you to speak to  
INTERCOM)  
by pressing the  
INTERCOM key  
the person who answers at the handset you are calling before releasing  
the external call to them  
TRANSFER TO:  
• Press INTERCOM key on the handset, it will display:  
CALLING  
HANDSET 2  
• Select the number of the handset to which the call is to be transferred  
1-4  For example if you intercom handset 2 the display will show:  
ꢀ3  
 
Handset operation  
• Press ON, SPEAKER or INTERCOM on the handset being called to  
answer the intercom call  You may now discuss the external call with  
the person who answered the other handset  
HANDSET 1  
IS CALLING  
• On the handset, press the OFF key to transfer the external call to  
the other handset  
CALL TRANSFERRED  
INTERCOM TO:  
Intercom call  
You can intercom between any handsets registered to it  
From the idle (off) mode, press INTERCOM  The handset will  
display:  
CALLING  
Select a number of the handset to be called (1-4)  
HANDSET1  
Press INTERCOM, ON or SPEAKER (  
the intercom call  The screens will display:  
) on the handset to answer  
INTERCOM  
Press INTERCOM, OFF/CLEAR on the handset to end the call  
If the handset you are attempting to intercom is out of range, or on an  
external call, the display will show:  
UNABLE TO CALL  
TRY AGAIN  
ꢀꢂ  
 
Handset operation  
Call forward  
You can forward calls between any handsets registered to it  
A handset on an external call can forward it to any other handset  
FORWARD TO:  
Press and hold the INTERCOM key on the handset, it will display:  
Enter the handset number you wish to forward to  
The handset will display:  
CALL FORWARDED  
At the handset press ON, SPEAKER or any of the dialing keys (0-9,  
*, #) to answer the call  
If the handset being called does not respond in about one minute, the  
external call will be returned to originating handset and the display  
will show:  
CALL BACK  
Find handset  
Locate a missing handset from the base unit by using these steps:  
• With the handset in idle, press FIND HANDSET  
• To end the page at the handset, press ON, SPEAKER or any dial pad key (0-9, *, #) on handset,  
or press FIND HANDSET at the base  
ꢀꢃ  
 
Handset operation  
Handset display screen messages  
Screen displays:  
PHONE  
When:  
The handset is in use  
The handset is on hook  
ENDED  
You are accessing an empty directory or call log  
You are saving to a full directory  
The call is on mute  
NO ENTRIES  
LIST FULL  
MICROPHONE MUTED  
SPEAKER  
The handset speakerphone is in use  
The battery needs to be recharged  
There is a call coming in  
LOW BATTERY  
INCOMING CALL  
NEW VOICE MAIL  
X NEW CALLS  
SEARCHING...  
BASE IS PAGING  
CALLING HANDSET X  
There are new voicemail messages  
There are new calls in the CID log  
The handset has lost communication with the base  
The base is paging handset(s)  
Calling another handset  
ꢀꢄ  
 
Handset operation  
Handset display screen messages  
Screen displays:  
HANDSET X IS CALLING  
LINE IN USE  
When:  
Other handset is calling  
An extension phone is in use  
There is no telephone line connected  
NO LINE  
The telephone number you have entered is already  
stored in the directory  
ALREADY SAVED  
SAVED  
Your operation is successful  
• The battery is not installed properly in the handset  
-OR-  
• The battery needs to be replaced  
-OR-  
WARNING CHECK BATTERY!  
• An incorrect battery has been installed by mistake  
The battery is very low  The handset should be placed  
in the base unit or charger  
PLACE IN CHARGER  
CHARGING  
A handset with a low battery has been placed in the  
base unit or charger  
ꢀꢅ  
 
Telephone settings  
Ringer volume  
> RINGER VOLUME  
RINGER TONE  
From the idle (off) mode, press MENU/SELECT on the handset then  
the or key to RINGER VOLUME  
RINGER VOLUME  
RINGER VOLUME  
Press MENU/SELECT on the handset  The current ringer volume  
will be shown:  
Press the or  
keys or enter a digit (0 through 6) to the desired  
volume  The current ring tone is played  At the lowest setting, display  
will show:  
The handset will not ring when a call comes in if ringer volume is set  
to the lowest setting  
Press MENU/SELECT on the handset  
> RINGER TONE  
KEY TONE  
Ring tone  
From the idle (off) mode, press MENU/SELECT on the handset then  
the or keys to RINGER TONE  
Press MENU/SELECT on the handset  
Press the or keys (or enter a digit 0 through 9) to sample the ring  
tones  The screen will show:  
RINGER TONE  
1
Press MENU/SELECT on the handset  
ꢀꢆ  
 
Telephone settings  
Key tone (preset to on)  
> KEY TONE  
LANGUAGE  
From the idle (off) mode, press MENU/SELECT on the handset then  
the or keys to select KEY TONE  
When the phone  
is set for pulse  
dial mode, it  
is possible  
to switch to  
Press MENU/SELECT on the handset  The current setting will be  
shown  Use the or  
keys to scroll to ON or OFF  When set to  
KEY TONE  
ON  
on, the handset will emit a beep whenever a key is pressed  
When the desired option is shown, press MENU/SELECT on the  
temporary tone  
mode during an  
ongoing call by  
pressing *  Once  
pressed, tone will  
be used for rest  
of the call  After  
you hang up, the  
phone will return  
to pulse dialing  
for the next call  
handset  
Language (preset to English)  
> LANGUAGE  
From the idle (off) mode, press MENU/SELECT on the handset then  
the or keys to LANGUAGE  
CLR VOICE MAIL  
Press MENU/SELECT on the handset  Press the or keys to  
select between English, Spanish or French  
Press MENU/SELECT on the handset  
LANGUAGE  
ENGLISH  
Dial type (preset to tone)  
From the idle (off) mode, press MENU/SELECT on the handset then  
or keys to DIAL TYPE  
> DIAL TYPE  
PHONEBOOK  
Press MENU/SELECT on the handset then use or keys to scroll  
from TONE to PULSE  
Press MENU/SELECT on the handset  
DIAL TYPE  
TONE  
ꢀ9  
 
Phonebook  
Your phone can store up to 50 numbers with names in memory  Each memory location can hold up  
to 32 digits for the number and 16 characters for the name  
If you register  
additional  
handsets to  
your base, the  
handsets share  
a common  
phonebook,  
which is stored  
in the base  
This means that  
entries inserted  
by a handset are  
available for all  
handsets and  
if one deletes a  
phonebook entry,  
it will disappear  
from all handsets  
Store a new entry  
• Press MENU/SELECT on the handset  
> STORE  
• With PHONEBOOK highlighted, press MENU/SELECT on the  
handset  
REVIEW  
• Press  
handset  
or  
to select STORE  Press MENU/SELECT on the  
ENTER NUMBER  
555-123-4567_  
• You will be prompted to ENTER NUMBER  
Use the dialing keys to enter the number you wish to store in the  
directory  Press the DELETE/MUTE on the handset to backspace  
and make corrections  Press MENU/SELECT on the handset  
• You will then be prompted to ENTER NAME  Use the dialing keys  
to spell the name  Use the and keys to move the cursor  Press  
DELETE/MUTE on the handset to backspace and make corrections  
Press MENU/SELECT on the handset  
ENTER NAME  
_
You’ll hear a confirmation tone, and the new phonebook entry will  
LIST FULL  
be displayed  
• If the phonebook is full, the handset or base unit will display:  
• You can also press REDIAL then or keys to scroll to the previously  
dialed number from the redial list you want to store in the phonebook  
Press MENU/SELECT on the handset  
• While entering numbers, press and hold PAUSE to add pauses if  
necessary  
ALREADY SAVED  
• If there is a duplicate number in the phonebook, the display will  
show:  
ꢁ0  
 
Phonebook  
Each press of a particular key causes characters to be displayed in the following order:  
# of key presses  
Key  
2
3
4
,
5
-
6
 
7
&
c
f
8
9
1
2
3
4
5
6
7
8
9
0
1
#
A
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
a
d
g
j
b
e
h
k
n
p
u
w
D
G
J
i
L
l
M
P
O
R
V
Y
m
7
t
o
q
v
x
r
s
z
T
W
0
9
y
*
?
!
/
(
)
@
*
space  
#
Review/dial from the phonebook  
• Press MENU/SELECT on the handset  With PHONEBOOK highlighted, press MENU/SELECT on the  
handset  With the desired phonebook entry highlighted, press MENU/SELECT on the handset  
-OR-  
Andrew  
With the handset in idle, press , the handset goes directly into  
phonebook review mode  
123-4567  
ꢁꢀ  
 
Phonebook  
Scroll through the phonebook entries using the and keys or enter  
first character of the name to be searched (using the digit keys) and  
continue navigating using the or keys as scroll keys, until you  
reach the entry to be dialed  
Andrew Smith  
555-123-4567  
When reviewing  
the phonebook,  
the second line  
of the display will  
show the phone  
number, up to  
16 digits  For  
numbers longer  
than 16 digits,  
only the first 13  
digits will be  
• Press ON or SPEAKER (  
), to dial the number  
PHONE 00:00:10  
Andrew Smith  
Edit a phonebook entry  
Follow the first two steps in Review/dial from the phonebook (page  
21) to reach the entry to be edited  
Press MENU/SELECT on the handset  
Press DELETE/MUTE on the handset to backspace then enter the correct number  Press and hold  
PAUSE to add pauses if necessary  You can also press REDIAL,  
shown  Press *  
or # to scroll the  
phone number  
to see the  
then the or keys to scroll to the previously dialed number from  
Andrew Smith  
redial list you want to store in the phonebook  Press MENU/SELECT  
555-123-4567  
on the handset  
additional digits  
Press MENU/SELECT on the handset  
You are now prompted to EDIT NAME  Press DELETE/MUTE on the  
handset to backspace, then use the dialing keys to enter the correct  
name (see page 21)  Use the and keys to move the cursor  
Press MENU/SELECT on the handset. A confirmation tone will  
If there are no  
entries in the  
phonebook,  
when it is  
accessed, NO  
ENTRIES will  
display  
EDIT NAME  
Andrew  
sound  
Delete a phonebook entry  
Follow the first two steps in Review/dial from the phonebook  
Press DELETE/MUTE on the handset  
A confirmation tone will sound.  
The handset or base will then move to the next entry if any  
Andrew Smith  
555-123-4567  
ꢁꢁ  
 
Caller ID  
Caller’s name  
Andrew Smith  
555-123-4567  
Caller’s telephone number  
NEW 6/15 10:15PM  
Time of call  
Date of call  
Shared call log  
The caller ID log is stored in the base, and is shared by the system handsets  Changes made at a  
handset will be reflected in all handsets.  
If the number of an incoming call matches an entry in your directory, the name will display exactly  
how you’ve entered it in the phonebook  For example, if Christine Smith calls, her name will appear  
as Chris if that is how you entered it into the phonebook  
Your phone has a caller ID (CID) with call waiting feature that works with service from your local  
phone service provider  Caller ID with call waiting lets you see who’s calling before you answer the  
phone, even when you’re on another call  
You may need to change your phone service to use this feature  Contact your service provider if:  
You have both caller ID and call waiting, but as separate services (you may need combined service)  
You have only caller ID service, or only caller waiting service  
You don’t subscribe to any caller ID or call waiting services  
You can use this product with regular caller ID service, and you can use this product’s other features without  
subscribing to either caller ID or combined caller ID with call waiting service  
There are fees for caller ID services, and they may not be available in all areas  
ꢁ3  
 
Caller ID  
This product can provide information only if both you and the caller are in areas offering caller ID service,  
and if both telephone companies use compatible equipment  
If you answer a  
call before the  
caller ID  
About call history (caller ID)  
Your phone can store up to 50 calls in its caller ID memory  When the memory is full, the oldest  
call will be deleted to make room for new incoming call information  For each call that comes in, the  
screen displays the following information between the first and second rings:  
information  
appears on the  
screen, it will not  
be in the call  
history  
Your caller’s name (15 letters are sent by your telephone  
company)  
The caller’s area code and telephone number  
The time and date of the call  
Andrew Smith  
555-123-4567  
NEW 6/15 10:15PM  
Review call history  
Press (CID) to view call history  
Use and to scroll through records in call history  
Delete records from call history  
Delete a specific call:  
Locate the record you want to delete from call history  
Press DELETE/MUTE on the handset. You’ll hear a confirmation beep.  
Delete all calls:  
DELETE ALL  
CALLS?  
• With the handset in call log mode, press and hold DELETE/MUTE  
on the handset  The screen displays:  
• Press MENU/SELECT on the handset. You’ll hear a confirmation  
beep  
ꢁꢂ  
 
Caller ID  
Dial a displayed number  
• Locate the record in call history that you want to dial  
• If you wish to change how the number is dialed, press #  The screen displays alternate dialing  
sequences available for this call  
When the number is correctly displayed for dialing, press ON or SPEAKER  
Press OFF/CLEAR  
on the handset(s)  
at any time to exit  
call history  
If both the name  
and number are  
not provided,  
UNABLE TO  
SAVE will be  
displayed  
Store a call history record in the directory  
1  Locate the record in the call history you want to store in the directory  
2  If you wish to change how the number is stored, press #  The screen displays alternate dialing  
sequences available for this call  
3  Press MENU/SELECT on the handset, you’ll hear a confirmation beep.  
Screen displays:  
When:  
The other party is blocking name and/or number  
information  
PRIVATE NUMBER  
Your phone company is unable to receive informa-  
tion about this caller’s name and/or number  
UNKNOWN NUMBER  
ꢁꢃ  
 
Voicemail  
Access voicemail  
When a voicemail is detected, VOICEMAIL key will be illuminated and NEW VOICEMAIL will display  
on the handset  
In order to use  
these features,  
you must  
subscribe to  
and activate  
voicemail service  
through your  
local telephone  
company  
Once your voicemail access number and password are programmed into your phone, you can quickly  
retrieve voicemail messages by pressing the VOICEMAIL key on the handset  
When retrieving voicemail messages, you can use the dedicated PLAY, SKIP and ERASE keys on  
the handset to access play, skip and erase messages functions  
Clear voicemail  
If you wish to manually turn off the voicemail indications on the handset, follow the steps below:  
From the idle mode, press MENU/SELECT on the handset, then the or keys to CLR VOICEMAIL  
Press MENU/SELECT on the handset, the screen will display TURN INDICATOR OFF? Press  
MENU/SELECT on the handset  
When one  
handset is  
accessing  
the voicemail  
setup, the other  
handset(s)  
cannot access  
it at the same  
time  If this is  
attempted, NOT  
AVAILABLE AT  
THIS TIME will  
be displayed  
Programming the Voicemail Access Keys  
Your phone is factory programmed with the appropriate key sequences for PLAY, SKIP, ERASE and  
VOICEMAIL keys  If the default programming for these or password do not work with your voicemail  
system, you can reprogram them  
From the idle mode, press MENU/SELECT on the handset, use or  
CODES, then press MENU/SELECT on the handset  With VOICEMAIL SETUP displayed, press  
to scroll to FEATURE  
MENU/SELECT on the handset  Use or  
SELECT on the handset  
to scroll to your desired option, then press MENU/  
ꢁꢄ  
 
Voicemail  
You can access the following options:  
ACCESS NUMBER PASSWORD PLAY SKIP ERASE RESET ALL CODES  
Program the password  
You need to program a password to access your voicemail. First, you must activate and define your  
voicemail password with the voicemail service provided by your local telephone company  Once you  
have defined your password, you can then program it into the phone.  
Use or to scroll to PASSWORD, then press MENU/SELECT on the  
handset to choose it  You will see the following display:  
PASSWORD  
_
Use the number keys to enter the password number provided by your  
local telephone company  To enter pauses, press and hold PAUSE  
Press DELETE/MUTE on the handset to erase numbers if you make  
a mistake. When finished press MENU/SELECT on the handset  
Program the voicemail key  
The default voicemail access number is *9ꢆ  If this does not match the number provided by your local  
telephone company, you will need to edit the number  
ACCESS NUMBER  
Use or to scroll to ACCESS NUMBER, then press MENU/SELECT  
on the handset  You see the following display:  
*98_  
Press DELETE/MUTE on the handset  Enter the new voicemail access  
number provided by your local telephone company  To enter pauses,  
press and hold PAUSE. When finished press MENU/SELECT on the  
handset  
Program the play key  
The default PLAY key number is 1  If this does not match the number  
provided by your local telephone company, you will need to edit the  
number  
PLAY  
1_  
Use  
or to scroll to PLAY, then press MENU/SELECT on the  
handset  The display will show:  
ꢁꢅ  
 
Voicemail  
Press DELETE/MUTE on the handset  Enter the new number provided by your local telephone  
company  To enter pauses, press and hold PAUSE. When finished press MENU/SELECT on the  
handset  
Program the skip key  
The default SKIP password is #  If this does not match the password provided by your local telephone  
company, you will need to edit the password  
Use or to scroll to SKIP, then press MENU/SELECT on the handset  
You see the following display:  
SKIP  
#_  
Press DELETE/MUTE on the handset  Enter the new password  
provided by your local telephone company  To enter pauses, press  
and hold PAUSE. When finished press MENU/SELECT on the handset  
Program the erase key  
The default ERASE key number is 3  If this does not match the number  
provided by your local telephone company, you will need to edit the number  
Use or to scroll to ERASE, then press MENU/SELECT on the handset  
ERASE  
3_  
You see the following display:  
Press DELETE/MUTE on the handset  Enter the new number provided  
by your local telephone company  To enter pauses, press and hold  
PAUSE. When finished press MENU/SELECT on the handset  
Reset all codes  
You can reset all voicemail codes to their default values  
Use to scroll to RESET ALL CODES, then press MENU/SELECT on  
RESET  
the handset  You see the following display:  
CODES?  
Press MENU/SELECT on the handset  
ꢁꢆ  
 
Custom pay-per-use (PPU) features  
PPU keys on handset  
To access PPU features on the handsets:  
• Press ON  
• Press BILLED SERVICES key, then use the  
• Press MENU/SELECT on the handset  
Your local  
telephone  
or  
keys to scroll to your desired option  
company may  
provide a monthly  
subscription to an  
individual service  
or a package  
of services  
Change PPU key setting  
Your phone is factory programmed with the PPU keys, you can reprogram the codes to the numbers  
provided by your local telephone company  
which gives  
From the idle mode, press MENU/SELECT on the handset, use or to scroll to FEATURE  
you unlimited  
usage for a small  
monthly fee  
CODES, then press MENU/SELECT on the handset  Press or to scroll to BILLED SERVICES,  
then press MENU/SELECT on the handset  Use or to scroll to your desired option, then press  
MENU/SELECT on the handset  
You can access the following options:  
AUTO CALLBACK  
RESET ALL CODES  
3-WAY CALLING  
REPEAT DIALING  
Change auto call back number  
The default AUTO CALLBACK number is *ꢄ9  If this does not match  
the number provided by your local telephone company, you will need  
to edit the number  
AUTO CALLBACK  
*69_  
Use or to scroll to AUTO CALLBACK, then press MENU/SELECT  
on the handset  The display will show:  
ꢁ9  
 
Custom pay-per-use (PPU) features  
Press DELETE/MUTE on the handset  Enter the new number provided  
by your local telephone company  To enter pauses, press and hold  
PAUSE. When finished press MENU/SELECT on the handset  
Change 3-way calling number  
The default 3-way calling code is F (flash). If this does not match the  
number provided by your local telephone company, you will need to  
edit the number  
Use or to scroll to 3-WAY CALLING, then press MENU/SELECT  
on the handset  You see the following display:  
3-WAY CALLING  
F_  
Press DELETE/MUTE on the handset  Enter the new number provided  
by your local telephone company  To enter pauses, press and hold  
PAUSE. When finished press MENU/SELECT on the handset  
Change repeat dialing number  
The default repeat dialing number is *ꢄꢄ  If this does not match the  
number provided by your local telephone company, you will need to  
edit the number  
REPEAT DIALING  
*66_  
Use or to scroll to REPEAT DIALING, then press MENU/SELECT  
on the handset  The display will show:  
Press DELETE/MUTE on the handset  Enter the new number provided  
by your local telephone company  To enter pauses, press and hold  
PAUSE. When finished press MENU/SELECT on the handset  
Reset all codes  
RESET  
CODES?  
You can reset all PPU codes to their default values  
Use or to scroll to RESET ALL CODES, then press MENU/SELECT  
on the handset  You see the following display:  
Press MENU/SELECT on the handset  
30  
 
Headset operation  
Headset  
You can use this telephone handsfree when you install a compatible 2 5 mm  
headset, purchased separately  
Plug the headset into the jack located on the side of the handset (under the  
small rubber flap). Do not force the connection, but make sure the plug fits  
securely  
Operating range  
This cordless telephone operates within the maximum power allowed by the Federal Communications  
Commission (FCC)  This handset and base can only communicate over a certain distance  The range  
may be affected by the weather or the construction of your home or office.  
If you receive a call while you are out of range, the handset might not ring or if it does ring, the call  
might not connect when you press ON  Move closer to the base, then press ON to answer the call  
If you move out of range during a phone conversation, you might hear noise or interference, or you  
may lose the call  To improve reception, move closer to the base  
If you move out of range while on a call and the call is lost, your line may remain busy  To hang up  
properly, walk back into range, periodically pressing OFF  
3ꢀ  
 
Batteries  
Battery care and maintenance  
After your battery is fully charged, you can expect the following performance:  
If you repeatedly  
get a low battery  
indicator, even  
after charging  
overnight, the  
battery should  
be replaced  
To reduce the risk  
of fire or injury to  
Operation  
Operating time  
While in use (talking)  
up to 8 hours  
up to 4 days  
While not in use (standby*)  
* Handset is off the base unit or charger but not in use  
The battery needs charging when:  
— A new battery is installed in the handset  
— The phone beeps twice every five seconds.  
— The screen displays LOW BATTERY and the low battery icon  
persons or  
damage to the  
telephone, charge  
the battery  
Place the handset in the base so the CHARGE light turns on  The battery is typically fully charged  
in 16 hours  
provided with  
this phone (or  
equivalent) in  
accordance with  
the instructions  
and limitations  
specified in this  
user’s manual  
(see page 5)  
You can keep the battery fully charged by returning the handset to the base after each use  
Replacing the handset battery  
1  Remove the battery compartment cover on the handset by pressing on the indentation and sliding  
the cover downward  
2  Lift out the old battery and disconnect  
3  Align the two holes in the new battery’s plug with the socket  
pins, and snap the plug into place  Snap the battery in the  
compartment, as described in Installation, on page 4  
4  Replace the cover by sliding it up into place  
5  The new battery must be charged before using the phone  Place the handset in the base and  
allow it to charge for at least 16 hours the first charge. The telephone might operate before that,  
but for best performance, let the battery charge fully  
3ꢁ  
 
Troubleshooting  
If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after  
trying these suggestions, call the Supplier  
Problem  
Suggestion  
My phone doesn’t work • Make sure the power cord is plugged in  
at all  
• Make sure the telephone line cord is plugged firmly into the base unit and the telephone wall  
jack  
• Charge the battery in the handset for 16 hours  For optimum daily performance, return the  
handset to its base when not in use  
• Reset the base  Unplug the unit’s electrical power  Wait for 15 seconds then plug it back in  
Allow up to one minute for the handset and base to reset  
• Youmayneedtopurchaseanewbattery, pleaserefertotheBatteriessection(seepage32)ofthis  
user’s manual  
I cannot get a dial • First try all the suggestions above  
tone  
• Move the handset closer to the base  You might have moved out of range  
• Your line cord might be malfunctioning  Try installing a new line cord  
• If the previous suggestions don’t work, disconnect the base unit from the telephone jack and  
connect a different phone  If there is no dial tone on that phone either, the problem is in your  
wiring or local service  Contact your local telephone company  
33  
 
Troubleshooting  
Problem  
Suggestion  
I cannot dial out  
• Make sure you have a dial tone before dialing. The handset may take a second or two to find  
the base and produce a dial tone  This is normal  Wait an extra second before dialing  
• Make sure your phone is set to the correct dial mode for the type of service that you have (pulse  
or touchtone)  Refer to the Installation section of this user’s manual to set the dial mode  
• If the other phones in your home are having the issue, the problem is in your wiring or local  
service  Contact your local telephone company (charges may apply)  
• Eliminate any background noise  Noise from a television, radio or other appliance may cause  
the phone to not dial out properly. If you cannot eliminate the background noise, first try muting  
the handset before dialing, or dialing from another room in your home with less background  
noise  
UNABLE TO CALL, • Move the handset closer to the base  You might have moved out of range  
TRY AGAIN displays  
on my handset  
• If the handset is in its base and the charging light does not come on, refer to The charge light  
is off (see page 37) in this troubleshooting guide  
• Reset the base  Unplug the unit’s electrical power  Wait for 15 seconds then plug it back in  
Allow up to one minute for the handset and base to reset  
• Other electronic products can cause interference with your cordless phone  Try installing  
your phone as far away from these types of electronic devices as possible: wireless routers,  
radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal  
computers, kitchen appliances and other cordless phones  
The batteries will not • Charge the battery in the handset for 16 hours  For optimum daily performance, return the  
handset to its base when not in use  
hold a charge  
• You may need to purchase a new battery, please refer to the Batteries (see page 32) section  
of this user’s manual  
• Your phone might be malfunctioning  Please refer to the Warranty section of this user’s manual  
for further instruction  
3ꢂ  
 
Troubleshooting  
Problem  
Suggestion  
I get noise, static, or • Other electronic products can cause interference with your cordless phone  Try installing  
weak signal even when  
I’m near the base  
your phone as far away from these types of electronic devices as possible: wireless routers,  
radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal  
computers, kitchen appliances and other cordless phones  
• Microwaves operate on the same frequency as your phone  It is normal to experience static  
on your phone while the microwave is running  Do not install this phone in the same outlet or  
near the microwave  
• If your phone is plugged in with a modem or surge protector, plug the phone (or modem/surge  
protector) into a different location  If this solves the problem, re-locate your phone or modem  
farther apart from one another, or use a different surge protector  
• Relocate your phone to a higher location  The phone will likely get better reception not installed  
in a low area  
• If the other phones in your home are having the issue, the problem is in your wiring or local  
service  Contact your local telephone company (charges may apply)  
I hear other calls while • Disconnect your base unit from the telephone jack, and plug in a regular telephone  If you  
using my phone  
still hear other calls, the problem is probably in your wiring or local service  Call your local  
telephone company  
3ꢃ  
 
Troubleshooting  
Problem  
Suggestion  
My handset does not • Make sure you have the ringer activated  Refer to the section(s) on ringer selection in this  
ring when I receive  
user’s manual  
a call  
• Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack.  
Make sure the power cord is plugged in  
• You may be too far from the base unit  
• Charge the battery in the handset for 16 hours  For optimum daily performance, return the  
handset to its base when not in use  
• You may have too many extension phones on your telephone line to allow all of them to ring  
Try unplugging some of the other phones  
• The layout of your home or office might be limiting the operating range. Try moving the base  
to another location, preferably on an upper floor.  
• If the other phones in your home are having the issue, the problem is in your wiring or local  
service  Contact your local telephone company (charges may apply)  
• Test a working phone at the phone jack  If another phone has the same problem, the problem  
is the phone jack  Contact your local telephone company (charges may apply)  
• Other electronic products can cause interference with your cordless phone  Try installing  
your phone as far away from these types of electronic devices as possible: wireless routers,  
radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal  
computers, kitchen appliances and other cordless phones  
• Your line cord might be malfunctioning  Try installing a new line cord  
3ꢄ  
 
Troubleshooting  
Problem  
Suggestion  
My calls fade or cut in • Other electronic products can cause interference with your cordless phone  Try installing  
and out while I’m using  
my handset  
your phone as far away from these types of electronic devices as possible: wireless routers,  
radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal  
computers, kitchen appliances and other cordless phones  
• Microwaves operate on the same frequency as your phone  It is normal to experience static  
on your phone while the microwave is running  Do not install this phone in the same outlet or  
near the microwave  
• If your phone is plugged in with a modem or surge protector, plug the phone (or modem/surge  
protector) into a different location  If this solves the problem, re-locate your phone or modem  
farther apart from one another, or use a different surge protector  
• Relocate your phone to a higher location  The phone will get better reception not installed in  
a low area  
• If the other phones in your home are having the issue, the problem is in your wiring or local  
service  Contact your local telephone company (charges may apply)  
The charge light is off  • Clean the handset and base charging contact each month using a pencil eraser or cloth  
• Make sure the power and line cords are plugged in correctly and firmly.  
• Reset the base  Unplug the unit’s electrical power  Wait for 15 seconds then plug it back in  
Allow up to one minute for the handset and base to reset  
• Your phone might be malfunctioning  Please refer to the Limited Warranty section of this  
user’s manual for further instruction  
3ꢅ  
 
Troubleshooting  
Problem  
Suggestion  
My Caller ID isn’t  
Caller ID is a subscription service  You must subscribe to this service for this feature to work  
working  
on your phone  
• Your caller must be calling from an area that supports caller ID  
• Both you and your caller’s telephone companies must use caller ID compatible equipment  
Common cure for If the unit does not seem to be responding normally, then try putting the handset in its base  If it  
electronic equipment  does not seem to respond, do the following (in the order listed):  
1  Disconnect the power to the base  
2  Disconnect the handset battery, and spare battery, if applicable  
3  Wait a few minutes  
4  Connect power to the base  
5  Re-install the battery(ies)  
6  Wait for the handset to re-establish its link with the base  To be safe, allow up to one minute  
for this to take place  
3ꢆ  
 
Maintenance  
Taking care of your telephone  
Your cordless telephone contains sophisticated electronic parts, so it must be treated with care  
Avoid rough treatment  
Place the handset down gently  Save the original packing materials to protect your telephone if you ever need to ship it  
Avoid water  
Your telephone can be damaged if it gets wet  Do not use the handset outdoors in the rain, or handle it with wet hands  Do not install your base unit near a sink, bathtub or shower  
Electrical storms  
Electrical storms can sometimes cause power surges harmful to electronic equipment  For your own safety, use caution when using electric appliances during storms  
Cleaning your telephone  
Your telephone has a durable plastic casing that should retain its luster for many years  Clean it only with a soft cloth slightly dampened with water or a mild soap  Do not use excess water or cleaning  
solvents of any kind  
Warranty  
The Supplier warrants, to the original purchaser only, the material and workmanship of this product for ONE YEAR from the date of purchase  We will repair or replace, at our option, this product without  
charge should it fail due to a defect in material or workmanship within that time period  
This warranty does not apply to loss or damage that is the result of accident, misuse or negligence. All other warranties, expressed, implied or statutory, including warranties of fitness for a particular  
purpose, are limited to the time period listed and are otherwise excluded from this warranty if unauthorized repairs are attempted  Additionally, the Supplier shall not be liable for any incidental or  
consequential damage or commercial loss, nor for any other loss or damages  
The Supplier assumes no responsibility for products sent without prior return authorization  
39  
 
Important safety instructions  
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:  
1  Read and understand all instructions  
2  Follow all warnings and instructions marked on the product  
3  Unplug this product from the wall outlet before cleaning  Do not use liquid or aerosol cleaners  Use a damp cloth for cleaning  
4  Do not use this product near water (for example, near a bath tub, kitchen sink or swimming pool)  
5  Do not place this product on an unstable surface, such as a table, shelf or stand  The product may fall, causing serious damage  
6  Slots and openings in the back or bottom of the base unit and handset are provided for ventilation  To protect them from overheating, these openings must not be blocked by placing the  
product on a soft surface such as a bed, sofa or rug  This product should never be placed near or over a radiator or heat register  This product should not be placed in any area where proper  
ventilation is not provided  
7  
This product should be operated only from the type of power source indicated on the marking label  If you are not sure of the type of power supply in your home, consult your dealer or local power  
company  
8  Do not allow anything to rest on the power cord  Do not install this product where the cord may have anyone walking on it  
9. Never push objects of any kind into this product through slots in the base or handset as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric  
shock  Never spill liquid of any kind on the product  
10. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the base or handset other than specified access  
doors may expose you to dangerous voltages or other risks  Incorrect reassembling can cause electric shock when the product is subsequently used  
11. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.  
12  Unplug this product from the wall outlet and refer servicing to an authorized service facility under the following conditions:  
A  When the power supply cord or plug is damaged or frayed  
B  If liquid has been spilled onto the product  
C  If the product has been exposed to rain or water  
D  If the product does not operate normally by following the operating instructions  Adjust only those controls that are covered by the operating instructions, as improper adjustment of other  
controls may result in damage and often requires extensive work by an authorized technician to restore the product to normal operation  
E  If the product has been dropped and the base and/or handset has been damaged  
F  If the product exhibits a distinct change in performance  
13  Avoid using a telephone (other than cordless) during an electrical storm  There is a remote risk of electric shock from lightning  
14  Do not use the telephone to report a gas leak in the vicinity of the leak  
15  Only put the handset of your telephone next to your ear when it is in normal talk  
ꢂ0  
 
FCC, ACTA and IC regulations  
FCC Part ꢀꢃ  
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules  These requirements  
are intended to provide reasonable protection against harmful interference in a residential installation  This equipment generates, uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio communications  However, there is no guarantee that interference will not occur in a particular installation  If this  
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
* Reorient or relocate the receiving antenna  
* Increase the separation between the equipment and receiver  
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected  
* Consult the dealer or an experienced radio/TV technician for help  
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product  
This product has been tested and found to comply with the FCC criteria  The handset may be safely held against the ear of the user  The base unit shall be installed and used such that parts of the user’s  
body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more  If you choose to use a clipping device, please make sure to only use the supplied belt clip  
FCC Part ꢄꢆ and ACTA  
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA)  The label on the back or bottom of this  
equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.  
The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA  A compliant  
telephone cord and modular plug is provided with this product  It is designed to be connected to a compatible modular jack that is also compliant  An RJ11 jack should normally be used for connecting  
to a single line and an RJ14 jack for two lines  See Installation Instructions in the user’s manual  
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called  The REN for this product is  
encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more  
information, please contact your local telephone company  
This equipment may not be used with Party Lines  If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your  
alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.  
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected  Repairs to this telephone equipment can only be made by the manufacturer or its  
authorized agents  For repair procedures, follow the instructions outlined under the Limited Warranty  
If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service  The telephone company is required to notify you before inter-  
rupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you  
of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product.  
The telephone company is required to notify you if such changes are planned  
If this product is equipped with a corded or cordless handset, it is hearing aid compatible  
If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:  
ꢂꢀ  
 
FCC, ACTA and IC regulations  
* Remain on the line and briefly explain the reason for the call before hanging up.  
* Perform such activities in off-peak hours, such as early morning or late evening  
Industry Canada  
This equipment complies with regulations RSS210 and CS-03 of Industry Canada  Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device  
must accept any interference, including interference that may cause undesired operation of the device  
The term ‘’IC: ‘’ before the certification/registration number only signifies that the Industry Canada technical specifications were met.  
The Ringer Equivalence Number (REN) for this terminal equipment is 0 1  The REN is an indication of the maximum number of devices allowed to be connected to a telephone interface  The termination  
on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.  
The RBRC® seal  
The RBRC® Seal on the nickel-metal-hydride battery indicates that VTech Communications, Inc  is  
voluntarily participating in an industry program to collect and recycle these batteries at the end of their  
useful lives, when taken out of service within the United States and Canada  
The RBRC® program provides a convenient alternative to placing used nickel-metal-hydride batteries into  
the trash or municipal waste, which may be illegal in your area  
VTech’s participation in RBRC® makes it easy for you to drop off the spent battery at local retailers participating in the  
RBRC® program or at authorized VTech product service centers  Please call 1-800-8-BATTERYTM for information on Ni-MH  
battery recycling and disposal bans/restrictions in your area  VTech’s involvement in this program is part of its commitment  
to protecting our environment and conserving natural resources  
RBRC® is a registered trademark of Rechargeable Battery Recycling Corporation  
ꢂꢁ  
 
Technical specifications  
Enhanced 5 8GHz technology–your phone operates on a dual band transmission that combines the best of  
5 8GHz and 2 4GHz technologies, providing enhanced performance over standard cordless telephones  
Frequency Control  
Transmit Frequency  
Crystal controlled  
PLL synthesizer  
Base: 5725–5850 MHz  
Handset: 2400–2483 5 MHz  
Receive Frequency  
Base: 2400–2483 5 MHz  
Handset: 5725–5850 MHz  
Channels  
95  
Nominal Effective Range  
Maximum power allowed by FCC and IC  Actual operating range may  
vary according to environmental conditions at the time of use  
Size  
Handset: 42mm X 52mm X 163mm  
Base: 120mm X 118mm X 63mm  
Weight  
Handset: 124 grams  
Base: 196 grams  
Power Requirements  
Memory  
Handset: 600mAH NiMH Battery  
Base: 9V DC @ 400mA  
Phonebook: 50 Memory locations, 16 characters for name, 32 digits  
for number per location  
Call Log: 50 Memory locations  
ꢂ3  
 
Index  
Delete a specific call 24  
Delete all calls 24  
Delete records from call history 24  
Dial a displayed number 24  
Dial type 19  
A
About call history 24  
Access voicemail 26  
Additional information 33  
Answering calls 12  
E
B
Base display 9  
Edit a phonebook entry 22  
Base unit layout 11  
Basic operation 9  
Batteries 32  
Battery care and maintenance 32  
Before you begin 3  
F
FCC, ACTA and IC regulations 41-42  
Find handset 15  
Flash function 12  
Belt clip 3, 6  
G
C
Getting started 3  
Caller ID 23-25  
Call forward 15  
Change 3-way calling number 30  
Change auto call back number 29  
Change PPU key setting 29  
Change repeat dialing number 30  
Charge the handset battery 6  
Check for dial tone 6  
Choose a location 4  
H
Handset and base indicators 9  
Handset display 9  
Handset display screen messages 16-17  
Handset layout 10  
Handset operation 12-17  
Headset 31  
Clear voicemail 26  
Conference call 13  
Custom pay-per-use (PPU) features 29-30  
Headset operation 31  
I
D
Important safety instructions 40  
Installation 4-7  
Delete a phonebook entry 22  
ꢂꢂ  
 
Index  
Install handset battery 4  
Intercom call 14  
Replacing the handset battery 32  
Reset all codes 28  
Review/dial from the phonebook 21  
Review call history 24  
Ringer volume 18  
K
Key tone 19  
Ring tone 18  
L
Language 19  
S
Shared call log 23  
Store a call history record in the directory 25  
Store a new entry 20  
M
Maintenance 39  
Making calls 12  
Mute 10, 13  
T
Table/desk installation 5  
Technical specifications 43  
Telephone settings 18-19  
The RBRC® seal 42  
To register your accessory handsets 7  
Transferring calls 13  
O
Operating range 31  
P
Parts checklist 3  
Phonebook 20-22  
Troubleshooting 33-38  
PPU keys on handset 29  
Program the erase key 28  
Program the password 27  
Program the play key 27  
Program the skip key 28  
Program the voicemail key 27  
V
Voicemail 26-28  
Volume control 13  
W
R
Wall mounting 8  
Warranty 39  
Re-register existing handsets to a new base 7  
Redial 12  
ꢂꢃ  
 
Printed in China  
91-000XXX-010-000  
 

Technika Flat Panel Television LCD24 620 User Manual
TechniSat Satellite TV System DIGIT MF4 S User Manual
Tektronix TV Mount 528A User Manual
Telex Speaker SbA760 User Manual
Toshiba DVD Recorder D R410 User Manual
Tripp Lite Switch B114 0H4 User Manual
Ultra Start Remote Starter 15xx User Manual
Viking Refrigerator DFFB304 User Manual
Vox Stereo Receiver AC100CPH User Manual
Wagan Power Supply 2107 User Manual