VTech Telephone CS6228 5 User Manual

Battery installation and charging  
Turn the answering system  
on or off  
Make, answer and end a call  
Make a call  
Install the battery as shown below. After  
installing the battery, you might be able to make  
and receive short calls. For best performance,  
charge the handset battery for at least 16 hours  
before use.  
The answering system must be turned on to  
answer and record messages.  
1. Press  
/FLASH or  
.
You hear a dial tone.  
2. Dial the number.  
When the answering system is turned on, the  
ANS ON/OFF light on the telephone base will be  
on and ANS ON will display on the handset.  
Quick start guide  
Make a predial call  
1. Dial the number.  
for models CS6228-3/CS6228-5/  
CS6228-6/CS6229/CS6229-2/CS6229-3/  
CS6229-4/CS6229-5  
1
2
To turn on or off with  
the telephone base:  
• Press ANS ON/OFF  
to turn the answering  
system on or off. If the  
answering system is  
turned on, it announces,  
“Calls will be answered.”  
If the answering system is  
turned off, it announces,  
“Calls will not be answered.”  
Plug the battery securely  
into the plug inside  
If the battery  
2. Press  
/FLASH or  
.
compartment cover is on  
the handset, press the  
indentation and slide the  
cover to remove.  
the handset battery  
compartment, matching  
the color-coded label.  
Answer a call  
Install the telephone base and  
charger(s)  
Install the telephone base and charger(s) as  
shown below.  
Press  
/FLASH,  
or any  
of the dialing keys (0-9, #, *).  
End a call  
Telephone  
base power  
adapter  
Press OFF/CLEAR or put the handset in the  
Telephone  
wall jack  
telephone base or charger.  
To turn on or off with a handset:  
Charger adapter  
If you have DSL  
high speed Internet  
service, a DSL  
filter (not included)  
is required.  
1. Press MENU/SELECT to show the menu  
when the handset is not in use.  
2. Press MENU/SELECT to select  
4
3
>
ANS. SYSTEM.  
Place the battery with  
the label THIS SIDE  
UP facing up and the  
Align the cover flat  
against the battery  
compartment, then slide  
>
3. Press or to select ANS SYS SETUP,  
then press MENU/SELECT.  
Electrical outlet  
not controlled by  
a wall switch  
4. Press MENU/SELECT to select  
wires inside the battery it towards the center of  
Telephone  
line cord  
>
compartment.  
the handset until it clicks  
into place.  
ANSWER ON/OFF.  
5. Press or to choose ON or OFF, then  
press MENU/SELECT.  
Charger  
Telephone base  
5
Charge the handset by  
placing it in the telephone  
base or charger. The  
CHARGE light  
CHARGE light is on when  
the handset charges.  
1. Use only the power adapter(s) and  
battery(ies) supplied with your VTech  
telephone.  
2. For complete feature instructions, please  
refer to your user’s manual.  
 

Technicolor Thomson DVD Player DTH700 User Manual
Toshiba All in One Printer 165 205 User Manual
Toshiba Computer Drive MK3021GAS User Manual
Toshiba Projector TDP T40 User Manual
Transition Networks Cooktop RS 232 TO 100BASE FX User Manual
Triarch Indoor Furnishings 25951 User Manual
True Manufacturing Company Beverage Dispenser GDM 26 User Manual
Tyan Computer Server B2933 User Manual
VXI TV Converter Box SVM2608 User Manual
Wayne Plumbing Product ISP40 User Manual