VTech Cordless Telephone LS5146 User Manual

Battery installation and charging  
Pair your first  
Pair your first  
Install the battery as shown below. For optimal  
performance, charge the handset battery for at least  
16 hours before use.  
Bluetooth cell phone  
To pair and connect your first Bluetooth cell phone:  
Bluetooth headset  
To pair and connect your first Bluetooth headset:  
2. Insert the plug as  
1. Press the tab and  
Quick start guide  
1. Press the MENU softkey on  
indicated. Make sure  
slide the battery  
1. Press CELL on the  
for model LS5146  
it is plugged securely  
and matches the  
color-coded label  
inside the battery  
compartment.  
the telephone base.  
compartment cover  
downwards.  
telephone base.  
Main Menu  
2. Press the UP and DOWN  
Install the telephone base  
Voice Mail  
Intercom  
Bluetooth  
NavKeys to highlight  
Bluetooth, then press the  
SELECT softkey.  
Install the telephone base as shown below.  
SELECT  
Cellular operation  
requires Bluetooth  
2. Press the YES softkey.  
connection.  
DSL filter (not included) required  
if you have DSL high-speed  
Internet service  
Set up Cellular?  
Bluetooth  
3. Press the UP and DOWN  
YES  
NO  
Set up Cellular  
Set up Headset  
Active Devices  
NavKeys to highlight  
Set up Headset, then press  
the SELECT softkey.  
SELECT  
3. Setyourcellphonetosearch  
for or add new devices, then  
press the NEXT softkey.  
Set up Cellular  
Set your Cellular to  
search for devices,  
then press NEXT  
Electrical outlet  
not controlled by  
a wall switch  
Telephone wall jack  
4. Set your headset to  
Set up Headset  
3. Place the battery  
with the label  
4. Align the cover flat  
NEXT  
discoverable mode, then  
press the NEXT softkey.  
Set your Headset in  
Discoverable mode,  
against the battery  
then press NEXT  
THIS SIDE UP facing compartment, then  
NEXT  
up and the wires  
inside the battery  
compartment.  
slide it upwards until it  
clicks into place.  
4. Once your cell phone finds  
your VTech LS5146, select  
it and then enter the PIN  
0000 on your cell phone.  
Set up Cellular  
Power adapter  
VTech LS5146  
in Discoverable Mode  
PIN=0000  
5. Once the telephone base  
Headsets Found  
Mary’s Headset  
finds your headset, select  
it and then press the PAIR  
softkey.  
Telephone  
line cord  
STOP  
HELP  
FIND  
INFO  
PAIr  
5. When pairing is completed,  
press the YES softkey on  
the telephone base.  
Set up Cellular  
Pairing complete  
Connect to  
Cellular ?  
6. Enter your headset’s PIN  
on the telephone base, then  
press the DONE softkey.  
The default PIN for most  
headsets is 0000.  
Set up Headset  
Enter PIN:  
0000  
YES  
NO  
DONE  
HELP  
ErASE  
Telephone base  
5. Charge the  
handset by  
Cellular setup  
completed  
7. When the pairing is  
completed, press the YES  
softkey on the telephone  
base.  
Set up Headset  
placing it in the  
telephone base.  
The handset  
charge light on  
the handset  
Pairing complete  
Connect to  
Headset ?  
NOTES:  
YES  
NO  
1. Use only the power adapter and battery  
supplied with your VTech telephone.  
will be on when  
charging.  
2. For complete feature instructions, please refer  
to your user’s manual.  
Headset setup  
completed  
Charge light  
 

Taylor Blender 067802 M User Manual
Telex Video Game Headset PH 88 User Manual
Toshiba DVD Player SDP72S User Manual
Trane Heat Pump 22 5202 03 3605 User Manual
Tricity Bendix Kitchen Entertainment Center TM 330 User Manual
Uniden Cordless Telephone DECT1588 Series User Manual
Unisar Baby Monitor BR149 User Manual
VTech Cordless Telephone t2340 User Manual
Wayne Dalton Thermometer 9200 Foamcore User Manual
Weed Eater Blower 530087893 User Manual